remain calm

Archive for the ‘music’ Category

‘towards programmed intellectual nothing’ video clip!

Saturday, January 14th, 2017

So, I made a video clip. Note: strobe effects.


This is an excerpt from ‘towards programmed intellectual nothing’, a mix-set of live analog synth tracks I produced late 2016 (see: previous post)

The audio (along with everything else on the album) is cut together from improvisations on a little analog rig, recorded directly to two-track.

From memory –
* Main arp is from a Roland SH-2, sequenced on an Arturia Beatstep Pro
* …which is synced with a Roland/Boss RS-505 looper
* …playing back a looped melody line from a Moog Prodigy
* …and then halfway through I kill the loop and take over playing it by hand
* Rhythms are via a custom sample set on a Volca Sample, which got mashed on with whatever hands were free
* There’s some Elektron SidStation in there as well, keyed off the beatstep

Post-production is just a bunch of reverb and compression and a bitcrush in the middle section. Everything’s already smushed together (arp and drums on one track, melody on the other) so there isn’t really any room to get clever.

All footage from Commodore 64 games/ambient. Most of the footage is taken from Impossible Mission, with cuts from a ton of other stuff I remember playing 30 years ago.

‘towards programmed intellectual nothing’ album released

Sunday, September 25th, 2016

all new. made in a week.

https://danielarena.bandcamp.com/album/towards-programmed-intellectual-nothing/

i wanted to record an album that sounded unfamiliar to me. so i chose some constraints that would prevent me from getting too connected.

this set was sequenced from solo, single-take hardware jams recorded to two-track with minimal editing and post-processing, mostly between 18-24 sept 2016. everything was mashed out live into sequencers with nothing prepared apart from a few rhythms.

so there’s a bunch of mistakes and clipping and leakage and analog grunge printed in. you can maybe sense the terror in the second half of some of these tracks as i desperately hang on.

‘cave art’ album released

Friday, September 16th, 2016

mostly ancient stuff.

https://danielarena.bandcamp.com/album/cave-art/

un was derived from hacked-up bits of old tracks. this is just the raw feed. some of these tracks themselves are reworks of older cast-offs. recursion!

some tracks are designed to loop forever, so they sequence a bit weirdly.

‘un’ album released

Saturday, December 27th, 2014

electronic/ambient/lo-fi experiment, produced under light time pressure

https://danielarena.bandcamp.com/album/un/

pretty happy with this one as well, although i can sorta hear a few things i’d like to change now…

ETI3600 post #2

Sunday, December 16th, 2012

I’ve been a bit too busy to open the ETI up and keep working on it, but I’ve already started on some plans for the front-end.

The keyboard controller in this thing is primitive digital: shaky, slow (~20ms delay), complicated and probably totally broken. I’m planning on replacing it with a little Arduino rig – I found one in stock at gorillabuilderz.

Arduino Due board

It runs a 32-bit ARM chip, which is ridiculous overkill for what I want – mainly went with this one because it has lots of digital inputs (enough to just wire up every key on the keyboard) and a couple of 12-bit analog outputs (will use one for CV, maybe the other for an extra LFO?). The nice thing about this is it means I can do other fun stuff later, like build in a chip-tune style arpeggiator, or maybe a MIDI input. It also means I can remove the most complicated board on there – the keyboard controller takes up a lot of space and it’s covered in scary unavailable chips.

The actual keyboard mechanism is really basic: each key activates a switch. At the moment, it’s hooked up to a resistor network: 12 lines for note, 4 lines for octave, which means it can get into a really weird state if you hit multiple keys at once.

ETI3600 keyboard unit

After a bit of reading, sorting this out looks dead simple: I need to rewire it so that when a key is down, it pulls a line to ground. That’ll let me rip out a huge amount of horrible wiring, and I doubt the Arduino will be any more delicate than the original digital circuit.

The other problem is that the voltages I need to generate are a bit weird. Trigger is -7V low, +7V high (!?), CV is 0-5V. The outputs I have will probably max out about 3.3V. So there’s probably going to be a little bit of buffer and amp circuitry in there as well.

More weird vintage synth oddities

Sunday, December 9th, 2012

So, I haven’t written anything here in a couple of years.

I was going to write about how the new go/no-go album is finally finished and will be coming out in early 2013, but I’m way too distracted by this bizarre thing:

ETI 3600 Synth

It’s an ETI 3600 – a 3 oscillator kit synth released in Australia in the mid 1970’s. Maplin released a synth based on the same circuits in the UK in the late 1970’s (e.g Maplin 3800 – when they’re working, they sound amazing).

This particular one isn’t in working order at the moment – but there’s a ton of resources around (including high-quality schematics), particularly at www.eti4600synthesiser.org.uk, so I’m hopeful I can get this one nursed back to health.

It doesn’t really make any proper noise yet. I’ve verified that the power supply works, and the reverb unit and the last stage of the amp works (I can get signal out of it when I thump the reverb tank) but I can’t really narrow down the fault any further without an oscilloscope… which I’m in the process of tracking down. I have a few hunches as to what it might be, though.

This one is also kinda weird in that it looks like there’s a bunch of stuff has been added by a previous owner. Also, it needs a scrub. I’m going to try and get some real sound out of it first, and then probably restore it back to stock.

various things

Thursday, June 3rd, 2010

just a couple of things

a couple of us got together to do a totally improvised live electronic set at a gallery opening a few weeks back – three keyboards, two iphones and some effects. it came out pretty good, i edited it down to an hour or so and uploaded it to soundcloud here: http://soundcloud.com/remaincalm/live-at-culture-jam-15-04-2010

coincidentally, one of the iphones was running drumtrack8 from simpleisbeautiful – great little app, very “live” programmable and some decent built-in sounds.

some awesome blog posts on DSP theory (er… and sound design in mayan temples) appearing on valhalladsp, thought i’d give it a bump: http://valhalladsp.wordpress.com/. this guy did the excellent eos reverb and valhalla freq echo plugins, and there’s some excellent info in there.

also, autechre were awesome live, new version of reaper is good, and i’ve been slack finishing off the new go/no-go EP because i’ve been very very busy. oh well.

go/no-go recording blog #2

Wednesday, March 3rd, 2010

now that ‘autofocus’ is up on iTunes, i figure this is probably a good time to compare the recording process for that with what we’re doing now.

first of all – we recorded an absolute stack of stuff for ‘autofocus’, giant chunks of which ended up getting cut. there were multiple, wildly different versions of some songs, and we left off (or outright abandoned half-way) at least four tracks. that was kinda the only way it could have been done, though. the album was recorded the way it was written – a bit random and cut-up and berzerk.

‘lost in berlin’ (check the iTunes link) is a good example of that. it started as a riff on a microkorg, and was emailed to steve with some blippy drums. steve repitched and mutilated the riff into an actual song in ableton live, but playing it live like that didn’t work. we shelved the song. i think we had another shot at a vocal somewhere in there. months later, we tried playing it rock-style and it sorta worked. we tracked a new rhythm part, and i dug up the original keyboard parts, added a new recording of steve’s vocals, and mixed the whole thing in reaper.

months. that took months. nearly a year. the song goes for about three minutes.

the same process played out for the other eight songs. i tried to get all “brian eno” on taz at one point and recorded him playing bass for a song he’d never heard before, just kinda shouting instructions at him as we went. that ended up as the main groove in ‘catching up with you‘, which is fun, but was a nightmare to work out a live arrangement for. the version of ‘things’ that ended up on there is completely different to how we play it live, but there are lots of elements in there that were pulled from an early demo of it, just processed until it sounded like it had been stuffed full of tiny robots. every song has some synthetic element to it, and hopefully that comes across as a cool sound. it’s a bit hard to judge everything objectively when you’ve heard everything thousands of times.

the new recording – which is almost certainly just going to be an EP – is coming together a bit differently.

we’ve added some new personnel (steve from great apes + others), and we’ve been rehearsing the hell out of the band. new songs are being written more in the rehearsal room than over the internet, and it’s coming out in the arrangements – we’re concentrating a lot more on just getting the groove right. which is probably why we bashed through all five basic tracks in a day, and some of that stuff was first- or second-takes. the extra percussion is actually adding some space, probably because steve and i are taking more breaks. it’s coming together alright.

we’ve now got all of the drums, all of the bass, and half of the keys and guitar comped and tracked. steve c’s recording his parts at his place, and steve a and i will be tracking percussion and extra keys at some point this month. probably at his place. hopefully his neighbours don’t totally freak out. there’s likely to be a lot of cowbell action. all of the keys and electronic percussion is being tracked live – none of the songs for this session were recorded to a click-track, so i can’t sync up drum machines to anything.

also, i put down this completely stupid solo and it’s awesome.

go/no-go recording blog #1

Saturday, February 13th, 2010

it took about a billion years, but we finally managed to get the go/no-go “autofocus” release shipped off to the duplicators (and flying over the internet in the general direction of itunes, which feels a bit weird).

we got a few clips done as well, thanks to stu willis for making the “catching up with you” clip possible.

anyway, we did it all DIY, and it worked out okay, so we’re gonna have a shot at a follow up EP the same way. but hopefully a bit quicker this time. i’ve had the urge to write about the recording process for a while, and this seems like a good place to start. also, i’m waiting for a plumber to show up and can’t really do anything else in the meantime.

it took a few years, but i’ve finally got myself a mobile recording rig that works pretty good and fits in the back of a daihatsu charade. the main problem is getting enough equipment to get a nice drum recording – once you get past two channels, everything gets a bit spendier and more complicated. and you end up with mic cables everywhere, and i’m really bad at winding them up neatly.

anyway. last sunday, we dragged our gear down to zen rehearsals to track drums and bass. we record there mainly because they run free bbqs on weekends, and they have a well maintained cappuccino machine. also, because some of their rooms are really well sound-proofed and have excellent room treatment, which is important – if the room sounds boxy (or if sydney’s loudest metal band are bleeding through the air conditioning system), the recording will sound bad.

cue: five hours of recording, five tracks of drums and bass done, despite 50% of the personnel suffering from crippling hangovers.

check out all the mess!

once i get everything home, i usually mix up a nice sturdy martini and transfer the tracks over from the portable recorder to the PC. the ancient vs1680 recorder i use is cheap, solid and sounds good, but getting the raw audio out of it onto the computer requires screwdrivers and lots of time and weird software and usually i have to shout at it a bit as well. but eventually i end up with the session loaded up in reaper, ready for edits.

there’s usually a bunch of takes of each song. sometimes one is just perfect the whole way through, but usually each one will have bits of inspiration hit at different times. this is where that martini comes in handy. i usually just map out the song on paper, then mark each take with ticks or crosses depending on how awesome or hideous each part is:

once i’ve mapped it out, i hack the best bits together, get a rough mix up, and start thinking about another martini. and overdubs.

with a quickie mix and some keys, it’s sounding a little like this:

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

in other news… where the hell is that plumber?

next up: percussion. in a week or two. with any luck.

stuff and things

Monday, March 30th, 2009

the blog’s been a bit quiet…

but:

  • go/no-go¬†have a new website up: http://gonogo.remaincalm.org¬†– and there’s some new music on there. let me know what you reckon.
  • i gave up on the whole pedal dsp idea. it’s just going to be too much work and i don’t have the cash for a devkit at the moment anyway.
  • but… i’ve been working on some more JS effects and these ones might actually work
  • i was also doing a little bit of dev work on the DS stuff but the development environment is a total pain in the ass (in that the core platform keeps getting updates that break compatibility with all the other 3rd party tools). i still have my old dev environment in a virtual machine somewhere so i can get back to that one day but really, it’s just so much damn effort. and bliptracker already does everything i need. so that’s all a bit ugh. i really need to put out that updated beta of dsmcu one day though, i just need to package it up…
  • i’ve been mucking about with the XNA XB360 dev environment. it looks very interesting. i have two separate ideas – one for a 2d puzzle/action game that doesn’t have gems or tiles and one for an experimental art game.

also i want to get a JLM preamp kit and get some soldering happening.

anyway.

‘avocado’, ‘floaty’ js effects demo

Saturday, September 20th, 2008

i’ve uploaded a quick demo of some of the free js effects i’ve built for reaper (linked here, click for more info)

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

this is just a quick guitar improvisation, played into two instances of floaty and one of avocado, streamed live to disk – no offline edits or effects except for a limiter were added to this.

update: i’ve just updated all of the effects, here’s a demo of avocado tempo sync’ed to some drums:

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

solo music package #2 – start waiting

Saturday, June 28th, 2008

i think this is #2, anyway. should start getting pretty interesting by #5 or so.

these date back to 2005-2006.

1: please wait

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

2: keep starting (a collaboration w/ rachel holmshaw, cheers!)

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

3: scissors

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

(i’ve given up on picking a catchy name to release this stuff under, i figure my actual one will do for the time being)

solo music package #1 – starry starry dub

Friday, May 2nd, 2008

now that i’ve got some more space on the server, i should probably start posting some of these tracks i’ve had lying around for aeons.

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

just a tidy little dub, built up on the spot in a couple of layers using a headrush loop pedal.

the fossil record

Friday, April 25th, 2008

thought it was finally time i got around to re-posting a party mix i did at the beginning of the year:

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

(~45 songs in 40 minutes!)

hello.

Saturday, April 19th, 2008

everything is broken! and new! but that’s okay. i’ll get around to cleaning up this layout properly at some point.

things from the old page are still kinda here: nds has the nintendo homebrew software ‘bliptracker’, there’s a flash game i helped with at oldgame.html, and some music and stuff up at mshopper and bsc, along with my new band which has a temporary home at myspace.

good. good? good.